QRZ! Ham Radio 3/QRZ Ham Radio Callsign Database - Volume 3.iso/digests/infoham/940369.txt

Internet Message Format | 1994-06-04 | 26KB

Date: Sat,  2 Apr 94 19:08:14 PST
From: Info-Hams Mailing List and Newsgroup <[e-mail]>
Errors-To: [e-mail]
Reply-To: [e-mail]
Precedence: Bulk
Subject: Info-Hams Digest V94 #369
To: Info-Hams


Info-Hams Digest            Sat,  2 Apr 94       Volume 94 : Issue  369

Today's Topics:
                            6m Equipment?
                       AEA Hot Rot whip for HT
                           ARLD018 DX news
                           Ham Fest Chicago
                     Hams, FCC, Delays, BS walks
                Heinous operating techniques (AGAIN!)
               HELP: Anyone know what a XR2206 chip is?
                 Mid Atlantic Hamfest Listing 4/2/94
              Misc. Questions on Choosing a Dual-Band HT
                     Need info on Kenwood R-1000
                       Repeater Voter Questions
                  thanks for info - mobile purchase
                       Time to lighten up.....
                        Where to buy crystals

Send Replies or notes for publication to: <[e-mail]>
Send subscription requests to: <[e-mail]>
Problems you can't solve otherwise to [e-mail].

Archives of past issues of the Info-Hams Digest are available
(by FTP only) from UCSD.Edu in directory "mailarchives/info-hams".

We trust that readers are intelligent enough to realize that all text
herein consists of personal comments and does not represent the official
policies or positions of any party.  Your mileage may vary.  So there.
----------------------------------------------------------------------

Date: 28 Mar 94 07:30:03 GMT
From: hp81.prod.aol.net!search01.news.aol.com![e-mail]
Subject: 6m Equipment?
To: [e-mail]

I am looking for good, INEXPENSIVE, 6m equipment. How do the Azden radios
(mobile, HT) compare with some of the more expensive options that are available
(Kenwood)?  Also, what about used equipment?  What is available?

Thanks,
  Bryan Koen
       N0YKN
[e-mail]

------------------------------

Date: 3 Apr 94 02:33:08 GMT
From: dog.ee.lbl.gov!agate!usenet.ins.cwru.edu!odin![e-mail]
Subject: AEA Hot Rot whip for HT
To: [e-mail]

In article <ah301-290394073455@sy_j.pgh.wec.com>,
Jerry Sy <[e-mail]> wrote:
>I tested it on an swr meter and its swr is > 3, my rubber duck is < 1.5 !

You can tune it by adjusting the length, checking it on the meter until
you find something < 1.5.  Scribe that length into the side of the antenna
so you can find it again without the meter.

BTW, there is usually no need to cross-post so widely.  I've set followups
to just rec.radio.amateur.antenna.

       Stephen

--
Stephen Trier  KB8PWA       "It don't mean a thing if it ain't got that
Other: [e-mail]     certain je ne sais quois."
Home: [e-mail]                         - Peter Schickele

------------------------------

Date: Sat, 02 Apr 94 04:44:23 GMT
From: ihnp4.ucsd.edu!agate!usenet.ins.cwru.edu!news.ysu.edu!malgudi.oar.net!infinet!n8emr![e-mail]
Subject: ARLD018 DX news
To: [e-mail]

==============================================================
|  Automatic relayed from packet radio via              |
|            N8EMR's Ham BBS, 614-895-2553                   |
==============================================================

SB DX @ ARL $ARLD018
ARLD018 DX news

ZCZC AE16
QST de W1AW
DX Bulletin 18  ARLD018
>From ARRL Headquarters
Newington CT  March 31, 1994
To all radio amateurs

SB DX ARL ARLD018
ARLD018 DX news

The items in this week's bulletin are courtesy of Bob, W5KNE, QRZ
DX, Chod, VP2ML, The DX Bulletin, Bob, WB2DIN, James, K6OZL, the
Yankee Clipper Contest Club PacketCluster network, and Contest
Corral in QST.  Thanks.

YEMEN.  Achmed, ex HZ1FM, has activated club station 7O1AA.  The
return of 7O1AA to the airwaves was on March 30.  Equipment left by
Paul, F6EXV, is being refurbished and expected to be on-line soon.
Schedules for QSOs with stateside stations have been set up.  On
Friday try 14243 kHz at 1500z with OE6EEG as net control.  On
Saturday try the same frequency at 1600z, again with OE6EEG.  Plans
are to move to the 14226.5 Family Hour Net shortly thereafter.  QSL
via Box 485, Aden, Yemen.

MACAO.  XX9AS, OH6DO, OH2KNB and OH2BH have an Easter Holiday gift
for you.  They will be putting XX9TZ on the air from the Hyatt
Regency on Taipa Island from Friday, April 1 through Monday the 4th.
Though this will be an all band effort, pay particular attention to
25 kHz up on 40, 20, 15 and 10 meters for CW, and 7065, 14195, 21295
and 28495 kHz for SSB.

FRANZ JOSEF LAND.  R1FJC has been on the air recently.  This could
be the first of a new series of call signs for the island.

JUAN DE NOVA ISLAND.  Listen for FR5ZQ/J to be active through the end of
April.  Check 14247 kHz between 1700 and 1900z, and 14256 kHz from
0200 through 0400.  QSL via CBA.

EUROPA ISLAND.  FR5ZU/E is on the air and plans operations to last
for four or five weeks.  Try the same frequencies and times listed
for Juan de Nova above.  QSL via CBA.

BANGLADESH.  UA4RZ plans to be signing S21ZL soon.

BANABA ISLAND.  Listen for T33CS and T33KK throughout this weekend. QSL via
G4WFZ and SM7PKK respectively.

TRINDADE ISLAND.  PY1UP will be on as PY0TUP from April through
August.  QSL his home call sign.

NIGERIA.  Rudi, DL9GMM/5N0, will be on until year end from Lagos,
mostly with CW at 100 watts.  Try 3513 kHz at 2300z, 10104 at 2350
and 14014 at 2115.  QSL via home call sign after his return to
Germany.

THIS WEEKEND ON THE RADIO.   The Holyland DX Contest, sponsored by
the Israel ARC, is a 24 hour event that starts at 1800z April 2.
Exchange signal report and serial number beginning with 001.
Israeli stations will send their area instead of a serial number.

The SP DX CW Contest runs from 1500z April 2 through 2300z April 3
on 160, 80, 40, 20, 15 and 10 meters.  Non SP stations send a six
digit serial number consisting of RST and serial number starting
with 001.  Polish stations will send RST and a two letter province
designator.

For more details on these operating events, check page 119 of March
QST.
NNNN
/EX

------------------------------

Date: 2 Apr 94 20:03:41 GMT
From: rci![e-mail]
Subject: Ham Fest Chicago
To: [e-mail]

The Chicago Amateur Radio Club will be sponsoring it's annual Ham Fest on
May 29, 1994 at DeVry Institute of Technology, 3300 N. Campbell, near Western
& Belmont (2400 W/3200 N)
from 8 Am to 3 Pm. For further info call George Sopocko 312-545-3622 tue-sat
10 am to 4 pm.  or E-Mail [e-mail]

--
"I'd rather have a bottle in front of me                  ---Paul Frank Covello
 than a frontal lobotomy!!!!!"                      E-Mail:       [e-mail]
                                                       FTP:       ftp.ripco.com
                                                      Talk: [e-mail]

------------------------------

Date: Fri, 1 Apr 1994 15:09:43 GMT
From: ihnp4.ucsd.edu!library.ucla.edu!europa.eng.gtefsd.com!howland.reston.ans.net!usenet.ins.cwru.edu!nshore!seastar![e-mail]
Subject: Hams, FCC, Delays, BS walks
To: [e-mail]

As quoted from <[e-mail]> by [e-mail] (Ed Bathgate):

> I am in the same waiting game as others waiting for my 1st call sign.
>
> The FCC (GOV'T as whole) seems to cater to the big groups & big $$$.
> ( Yeah ok Ed, nothing we already dident know. )
>
> I am surprised as to how few STRONG electronic techs & engineers there
> are anymore.  Yes the trade schools are turning grads out in droves, but
> I bet that my wife could do more to trouble shoot a digital dashboard
> in a GM car than could the majority of Graduated Electronic techs!
> And she has only learned from watching me.
>
> I recently looked for some Ham Radio Magazines, but only found 1 after
> a long drive to a large magazines only shop.
>
> I remember years back, you could go to just about any convience store
> or food store and get Popular Electronics, Radio Electronics, Elementary
> Electronics, CQ, 73, and on some occasions QST.
>
> Those days are gone.  I counted no less than 12 different Wrestling
> mags, 6 music magazines, 5 bridal mags, 6 off road mags, 3 hot rod mags,
> 4 different bathing suit mags (sim to sports illustrated swimsuit)

 Uh, I must live in heaven then.  Most of the local stores
(Omni (grocery store), Osco drug, even K-mart) have at least *some* of
those titles.  I've not seen QST or Elementary Electronics, but Omni
regularly has CQ, 73, Popular Electronics and Electronics Now (I think
it used to be Radio Electronics).
 The catch is, they only have about 5 or 10 copies of them.
When these sell out, they're out till next month.  Perhaps you picked
a bad day - keep looking.

--
While (its_not_working())                            John Welch, N9JZW
  mess_with_it();                                    [e-mail]

------------------------------

Date: 2 Apr 94 12:10:17
From: ihnp4.ucsd.edu!usc!howland.reston.ans.net!usenet.ins.cwru.edu!lerc.nasa.gov!magnus.acs.ohio-state.edu!csn!news.usafa.af.mil!usafa2![e-mail]
Subject: Heinous operating techniques (AGAIN!)
To: [e-mail]

In article <bote.765267957@access1> [e-mail] (John Boteler) writes:
   (quoting antoher)
   >each others mistakes.  This is the way it works on repeaters.  A
   >new ham listens for a while, hears all the bad practices, and
   >proceeds to do likewise.  Perhaps this is how bad habits are
   >propagated?

   I'll say!

   The latest thing around here, and I hope it is not becoming
   accepted practice nationwide, is to key up and say "Here is" or
   "This is" then quit transmitting to wait a second for
   the <beep>, then continue transmitting your callsign
   to check into a controlled net.

   Not only is this a waste of net time, it just sounds stupid.

   I can anticipate that someone will rationalize that this
   pause allows one to discern if he is doubling with another
   station trying to check in, a la W3HXF. It don't work!

   In fact, it is even worse than simply transmitting your
   callsign and shutting up because callsigns have variable
   length, "this is" takes almost exactly the same time
   to speak regardless of the speaker. So much for that argument.

   I just hope that this is a local* phenomenon which has
   been propogated by the newcomers mimicing newcomers,
   as Jeff has pointed out above. The trouble is that this
   disease is spreading over several of the linked repeater
   systems, meaning that the number of newcomers exposed
   to this time waster is multiplied many times.


The practice you're referring to has been used on (some) USAF MARS
nets for awhile now, and in fact is taught as "good operating
practice".

I'm with you, though.  I think it sounds dumb and in my experience
does NOT reduce the number of doubles during check-ins.  You hit
the nail on the head --  the phrase (proword, for you MARS types)
"this is" takes virtually the same amount of time regardless of
who the op is. If two ops key down at the same instant, they
will "hear" each others' pauses, and keep on going, thinking that
they aren't doubling with someone else.  The few times I've seen
this work is when either a) one of the ops speaks much slower than
the other, or b) one of the ops holds the PTT switch a touch longer
and some background noise is transmitted, thus letting the other
op hear that there is another station on frequency.

Personally, when I check into a MARS net, I generally wait until
it seems all the other ops in my state have checked in, then
check in when NCS says "Any others from state XX?"  I generally
don't have the loudest signal on freq, so that generally works
the best -- I just mash the PTT, and give the full check-in
statement, just like the manual says.  No pauses here.


--
Jeff Miller,  NH6ZW/N0,  AFA5MJ   (ex WD6CQV, AFA1DO, AFA8JM, AFA1HE)
USAFAnet Manager and General Troubleshooter [[e-mail]] or
HQ USAF/DFYC, USAF Academy, CO 80840      [[e-mail]]
55: It's not a good idea, it's just the law.  E-mail for NMA info.

------------------------------

Date: 2 Apr 94 06:25:32 GMT
From: ihnp4.ucsd.edu!swrinde!sgiblab!sgigate.sgi.com!olivea!isc-br!tau-ceti!jupiter!opus-ovh![e-mail]
Subject: HELP: Anyone know what a XR2206 chip is?
To: [e-mail]

[e-mail] (Christopher Barnhart) writes:

> |> Help, has anyone out there heard of a chip  XR2206?
>
> This device is a Monolithic Function Generator made by EXAR.
> Don't know where do get them anymore.  I think EXAR died or
> or was purchased by someone.

Isn't this a modem chip?  I think EXAR is alive and well.  My
dual 16C550 chip on my PC's i/o board has an EXAR label.

------------------------------

Date: 2 Apr 1994 16:14:14 -0500
From: ihnp4.ucsd.edu!agate!howland.reston.ans.net!news.intercon.com!news1.digex.net!access.digex.net![e-mail]
Subject: Mid Atlantic Hamfest Listing 4/2/94
To: [e-mail]

           MID-ATLANTIC HAMFEST LISTING                April 2, 1994


The following is a listing of known hamfests in the MD/NJ/PA/VA area.
I will update this list as necessary. Please send any additions or
corrections to me at [e-mail] so that others may benefit.

Thanks,

Chris Smolinski, N3JLY


  April 10, 1994:

HAMCOMP '94 8AM-1PM, $5 adm, $12 tailgating, $20 table.
Trenton State College, Rt 31, Ewing Township.
Talk-In 146.67-, 146.52 simplex.
Contact Don Write AA2F [phone].


  May 7, 1994:

Kent Island ARC, 8AM-2PM, $4 adm, free tailgating
VFW, VFW Road, Behind Sleep Inn, Kent Island, MD
Talk-In 146.94/146.34


  May 15, 1994:

HAMFEST '94, 7AM-2PM, $5 adm, $8 tailgating, $12 tables.
Middletown Grange Fairgrounds, Penns Park Rd, Wrightstown, PA
Talk-In 147.09/R, 146.52 simplex
Contact: George Brechman N3HBT [phone]


  May 21, 1994:

Cherryville Hamfest, 8AM-2PM, $6 admission, $10 tailgating, $15 tables
Warren County Farmers Fairgrounds, Rt 518 North, Harmony, NJ I78-exit 3.
Contact Keith Burt, KF5FK, [phone] before 10PM
VE Test Session Contact Marty Grozinski, NS2K, [phone] before 9PM
Talk-In 147.375+ & 146.820-


  May 22, 1994:

Great Hagerstown Hamfest, 8AM-3:30PM, $5 adm, $5 tailgating, $20 tables
Hagerstown Jr COllege Rec Center, Exit 32B from I-70, right at Edgewood Rd
Contact Page Pyne or Fred Bailey [phone]
VE Exams 9AM contact Pat KQ8E at [phone]
Talk-In 146.34+


  June 5, 1994:

Ole Virgina Hams ARC Hamfest, 8AM-3PM $5 adm, $5 tailgating
Prince William County Fairgrounds, SR 234 Manassas, VA
Talk-In 146.97-, 224.66-
Contact Jim Hawk N3ODZ, PO Box 1255 Manassas, VA 22110


  June 19, 1994:

Father's Day Hamfest, 8AM-3PM, $5 adm, $5 tailgating
Walkersville Fire Co, Walkersville, MD, rt 15 to rt 26 to rt 194
Frederick Amateur Radio Club, PO Box 1260, Frederick, MD 21702
Talk-In 146.52, 147.06+, 448.425-


  July 10, 1994:

Maryland Hamfest, 8AM-?, tailgating opens at 6AM
Timonium Fairgrounds, York Rd, I-695 to I-83 to Timonium Rd
BRATS, PO BOx 5915, Baltimore, MD 21208
VE Exams 10AM, Pre-registration required
Talk-In 147.03+, 224.96-


  July 16, 1994:

Red Rose Repeater Assn, 9AM-3PM $5 adm, $5 tailgating, $20 tables
McCaskey High School, Reservoir & N Franklin Streets, Lancaster, PA
Red Rose Repeater Assn, PO Box 8316, Lancaster, PA 17604
Talk-In 147.015+


  August 7, 1994:

Southern Patuxent Hamfest, 7AM-2PM, $5 adm, $5 tailgating, $25 tables
Prince George County Equestrian Center, Upper Marlboro, MD
Rt 301/ Rt 4, exit 11-A (Rt 4 Pennsylvania Ave) from DC Beltway I-495
Contact: Southern Patuxent ARC, PO Box 399, St Leonard, MD 20685
         [phone]
Talk-In 147.15

Hamfest 94, 8AM-?, $5 adm, $3 tailgating
Bucks County Drive In Theater, rt 611, 6mi N of Pa Turnpike exit 27
Mid Atlantic Radio Club, PO Box 352, Villanova, PA 19085
Talk-In 147.06, 145.13


  August 14, 1994:

SARA Carroll County Hamfest, 8AM-?, $5 adm, $5 tailgating, $8 tables
Carroll County Ag Center, Smith Ave, Westminster, MD
Contact: Alan Parker, KS3L, [phone]
         SARA Hamfest, 607 Brentwood Rd, Linthicum, MD 21090
Talk-In 146.52, 224.68, 224.64


Hamfest & Computerfest, 8AM-?, $4 adm, $7 tailgating, $25 tables
Career Institute of Technology, Easton, PA
Delaware-Lehigh ARC, RR 4 Greystone Bldg, Nazareth, PA 18064-9211
[phone]
Talk-In 146.70


  September 9 & 10, 1994:

Queen Wilhelmina State Park,  Mena, Arkansas. $2 park entrance fee, $5 adm.
Contact Gerald Wallis, N5KKD, [phone]


  September 17&18, 1994:

Virginia Beach Hamfest $6 adm, $15 tailgating, $30 tables, $125 booths
Virginia BEach Pavillion
Manny Steiner, K4DOR, 3512 Olympia Lane, Virginia Beach, VA 23452
(804) HAM-FEST


  September 18,1994

South Jersey Radio Assn, 8AM-3PM, $5 admission, $5 tailgating
Pennsauken High School Parking Lot, near US rt 130 / NJ rt 73
Contact Diane Nafis, N2LCQ, [phone], [phone]
VEC Test Session registration at 9:30 AM
Talk-In 145.290-


  October 30, 1994:
Mason Dixon Hamfest 8AM-?, $5 adm, $5 tailgating, $15 tables
Carroll County Ag Center, Westminster, MD
Mason Dixon Hamfest, PO Box 763, Hanover, PA 17331
VE exams $5.60, 9AM, reg 8AM, Page Evans NE3P, [phone]
Talk-In 145.410-



------------------------------

Date: 2 Apr 1994 07:27:46 GMT
From: ihnp4.ucsd.edu!agate!howland.reston.ans.net!europa.eng.gtefsd.com!news.msfc.nasa.gov!sol.ctr.columbia.edu!news.columbia.edu!namaste.cc.columbia.edu![e-mail]
Subject: Misc. Questions on Choosing a Dual-Band HT
To: [e-mail]

Last time I posted a question about buying an HT, many responses said to
make sure to ask around here... so here are a few more questions:

     What's the difference between the Icom W2A, W21A and W21AT?

     What's the difference between the Standard C558A and C178A?

     DJ-580T, IC-W21AT, TH-78A, C588A & FT-530  These five HTs were
reviewed in last month's QST and as they all have various interesting
features, I'm having a hard time choosing between them.  To help
differentiate them, I  would like to know how modifiable they are.  Can
any of these models NOT be modified to pick-up aircraft frequencies?
(Yes I know that two of them don't need to be modified at all.)  Now
could any of these be modified to receive cellular frequencies without
getting bad intermod problems?  And the last question, which of them can
be modified to transmit on a commerical frequency?  (I know that the FCC
probably would not approve of this and that if I want scanning I should
consider a separate scanner, but I do not want to have to carry an HT,
a commercial radio and a scanner.)

If you have any other comments I would of course appreciate them greatly.


Thanks,

Marc Wollemborg

------------------------------

Date: Sat, 2 Apr 94 02:46:30 -0500
From: ihnp4.ucsd.edu!dog.ee.lbl.gov!agate!howland.reston.ans.net!noc.near.net!news.delphi.com![e-mail]
Subject: Need info on Kenwood R-1000
To: [e-mail]

 I have recently gotten hold of an R-1000 with no documentation. Does
anyone have an owners manual or can you give me any info on it. Can it be
computer controlled? Kenwood no longer supplies manuals for it so I am sort of
up the creek here. Any info would be helpful. Please email me at
MATTMOORE@DELPHI>COM.
Thanks
 KE6CZM

------------------------------

Date: 2 Apr 1994 01:55:35 -0500
From: ihnp4.ucsd.edu!agate!howland.reston.ans.net!news.intercon.com!news1.digex.net!access1![e-mail]
Subject: Repeater Voter Questions
To: [e-mail]

[e-mail] (Jim Reese) writes:
>Dave Dabell <[e-mail]> wrote:
>>  What voter should we use?

>highly recommend it.  You can sometimes find surplus Motorola and GE voters
>on the used market.

The Motorola Spectra-TAC requires either TLC to keep working
within established parameters or some reworking. A recent
article in Mobile Radio Technology (or similar rag)
discussed how wonderful the improvements made by the author
were, but failed to provide any substantive detail on
how to implement those improvements.

>>  Anyone have suggestions on how to preserve audio
>>  fidelity over the UHF link?

>deviation of the links, you can get away with no limiter.  The audio can be
>made flat from below 100 Hz to above 3 kHz with normal narrow-band FM

I second this. You essentially want a pair of wires extended
from the remote site to the transmitter site via the
magic of radio. The less processing in this path, the better.

>>  What is the best way to match the remote receiver
>>  audio to the main receiver?

>This is the most important aspect of a voted system.  If the receivers don't
>match, the voter will tend to favor one receiver over another.

One method I have seen used is to simply transmit the main site
receiver audio to the main site via radio, however short the
distance. This has two advantages:
 A) it matches the audio response to that of the
    other sites, assuming you use similar equipment
    and configuration;
 2) if you suddenly need to make your repeater split-site
    to eliminate interference, the process is simplified:
    just pick it up and install it at some distance
    from the transmitter. *

The disadvantage is that it adds complexity and cost where you
might not want it.

>I think you'll be pretty happy with it.  The only down side is the additional
>maintenance of the link equipment and voter.

As I recently commented to another gentelman considering entering
the repeater business, do not underestimate the amount of
time that a more complex repeater system can consume.
The analogy is the big, empty hard disk which soon is consumed
by new software and data. :)


*Note 2: E.g. we had a single-site repeater suddenly beset
with howling feedback starting every sunrise and stopping every sunset.
It was WTOP (1500KC) mixing with WLMD (900KC); if you do the math,
you'll find that the difference of these two stations is = 600KC.
Ta da! Instant intermodulation products. We split the main receiver
away from the transmitter and all was right in the world again.

--

rec.nude: your exit to good living along the Information Toll Road.
finger [e-mail] for PGP key and an operator will help you.
Only 2 days until Opening Day!  How 'bout them Os!!

------------------------------

Date: 2 Apr 94 22:02:47 GMT
From: [e-mail]
Subject: thanks for info - mobile purchase
To: [e-mail]

A week or so ago, I asked the net for advice on a mobile 2m/440 rig that
had particularly good out-of-band receive characteristics.  Thanks for the
advice from over 20 folks.

I apparently was not clear enough in the original post -- I was looking
for a unit which could be installed in an auto, not an HT.  But the HT
advice was good, too.

FYI - I have ordered a Kenwood TM 742A.    OK -- let's hear how
horrible/great a decision I made.

I was quite surprised and pleased to hear from a couple of folks about
Standard products.  I hardly ever hear about this brand of radio products.
Anyone willing/able to discuss?

Paul Marsh    N0ZAU  Omaha   [e-mail]

------------------------------

Date: Sat, 2 Apr 1994 22:59:12 GMT
From: news.Hawaii.Edu!uhunix3.uhcc.Hawaii.Edu![e-mail]
Subject: Time to lighten up.....
To: [e-mail]

In article <[e-mail]> [e-mail] (Jeffrey D. Angus) writes:
>Time to interject some humor here. I spotted this in the Yucks digest and
>just knew it belonged here....
>
>I was toying with using search and replace to insert Jeff Herman's name in
>this, but figured that the rest of you would figure it out on your own.

This guy is just like herpes. No getting rid of him. And the article sounds
as if it was written for him with his fixation of certain body parts
(Where did Conway shoot himself? What did Walt sit on? ad infinitum)
And why am I responding to him? Well if he's going to post my emails
to him over the net I might as well respond over the net, instead.

Note that he's voluntarily taken the position of moderator on .swap
to save us from paying too much for used equipment. Thanks, Jeff.

Jeff (the good guy) NH6IL
Jeff NH6IL

------------------------------

Date: Sat, 2 Apr 94 14:36:48 GMT
From: ihnp4.ucsd.edu!swrinde!cs.utexas.edu!howland.reston.ans.net!europa.eng.gtefsd.com!news.umbc.edu!eff!news.kei.com!ub!galileo.cc.rochester.edu!uhura.cc.rochester.edu![e-mail].
Subject: Where to buy crystals
To: [e-mail]

Can anyone recommend a place to buy crystals for HF use.  I plan on building
a QRP rig using HC/6U crystals.  Any suggestions would be welcome.

Brian Stamper    [e-mail]
KB4JPO

------------------------------

End of Info-Hams Digest V94 #369
******************************
******************************